Push Block for Table Saw

Best Push Block for Table Saw: Top 5 Expert Picks in 2024

Table saws without push blocks are extremely unsafe when cutting wood. Any woodworker knows that the blades on table saws rotate at high speeds and are sharp enough to cause serious cuts. With years of experience, there is always the risk of cutting yourself & even a minor cut can result in blood loss, leading to an amputation.

This is why the best push block for a table saw is a must-have safety device. These push blocks are designed to help prevent accidents by giving the user more control over the workpiece. By holding the workpiece securely, push blocks let you cut precisely without putting your hands at risk.

There are different sizes and shapes of push blocks, so you must pick one that fits the size and type of your workpiece. Continue reading to find the most effective push blocks to keep you safe using a table saw.

MICRO JIG GRR-RIPPER 3D Pushblock Table Saw

Material: Plastic
Color: Yellow
Adjustability: Fully adjustable
Item Weight: 2 pounds

Delmar Tools Adjustable Table Saw Push Block

Material: Plastic
Color: Orange
Adjustability: Adjustable center leg
Item Weight: 1.54 pounds

Fulton Gator Grip Podular Patterned Push Block for Table Saw

Material: Thermoplastic Elastomer
Color: Yellow
Adjustability: Not Adjustable
Item Weight: 1.38 pounds

Best Push Block for Table Saw: Expert Choice

Differences Between Adjustable and Non-Adjustable Table Saw Push Blocks

Differences Between Adjustable and Non-Adjustable Table Saw Push Blocks

The main purpose of a push block is to keep your hands and fingers away from the table saw blade while cutting, but there are two types of table saws push-through blocks:

Adjustable Push Blocks

Adjustable push-through blocks can be adjusted to fit the width of the material you’re cutting. These blocks have a knob or screw that can be used to change the height of the pad. This is useful for accommodating different thicknesses of stock. These adjustable push blocks are more versatile, but they’re also more expensive.

Non-Adjustable Push Blocks

Non-adjustable push-through blocks generally have a single pad that is permanently attached to the body of the push block. These are typically less expensive than adjustable push-through blocks but can only be used with one stock thickness. These non-adjustable push blocks are less expensive than the other push blocks.

When picking a push block, you should consider the types of projects that you will be working on. If you only plan on making straight cuts with one type of material, then a non-adjustable push block will suffice. An adjustable push block is preferable when working with curvy cuts or materials of different widths.

Top Adjustable Table Saw Push Block

Adjustable Table Saw Push Block

Any expert woodworker will tell you that the ideal adaptable table saw push block can keep your fingers safe when using a table saw & give you the ultimate control and accuracy when making cuts. These push blocks feature an adjustable handle set to the ideal position for your workflow.

The following are the most popular adjustable push-through blocks for table saws:

➤ MICRO JIG GRR-RIPPER 3D Pushblock Table Saw

MICRO JIG GRR-RIPPER 3D Pushblock Table Saw

The MICRO JIG GRR-RIPPER 3D pushblock table saw is a great tool that helps to stabilize the cut and keep the stock firmly against the fence while also eliminating kickback. This allows for cleaner cuts and greater safety when using the table saw.

Its fully adjustable design allows it to work with a variety of materials. It offers an extremely precise and controlled grip due to the high friction and durability of the grip. The threaded grooves on the bottom of the push block provide increased traction and allow you to work with small pieces of wood safely.

You can easily clean the push block with rubbing alcohol or denatured alcohol, adding convenience to any table saw. Integrating balance support push block makes your cut squared, and even the tiniest pieces of the wood are handled safely.

MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow

● Fully adjustable
● Treaded grooves
● Prevent kickbacks
● High-friction durable grip

How Can this Product Help You?

MICRO JIG push block table saws’ high-friction sturdy grip can help you hold onto the stock tightly, preventing it from kickback. The 1/4″ ripping allows precision cutting, giving you greater accuracy when cutting, and the threaded grooves increase traction even when sawdust is present.

Besides accommodating varied sizes and widths of materials, its fully adjustable center leg will secure virtually any type of wood, solid wood surface, plastic, or aluminum.

With all these features combined, the MICRO JIG GRR ripper push block adjustable push block for the table saw can help you increase your precision and protect you from dangerous accidents.

Pros:

  • Provides complete control over the workpiece
  • Workpieces get more traction with threaded grooves
  • Handles small pieces confidently with a powerful grip
  • The center leg adjusts to fit different sizes and widths
  • Efficiency enhanced by the three directions of force

Cons:

Assembly instructions are not includedComparatively expensive to similar products


➤ Delmar Tools Adjustable Table Saw Push Block

Delmar Tools Adjustable Table Saw Push Block

The Delmar Tools adjustable table saw push block is a helpful tool for making 1/4″ or narrow rip cuts using a table saw. With this device, you can eliminate kickback while protecting your hands safely and away from the saw blades.

This gripper table saw push block is adjustable to create different width cuts, which allows you to have complete control of both sides of the stock during the rip cut. The push block also provides stability and guidance through the cut, gripping both sides of the stock.

Its adjustable center leg and balance wheel allow you to make various width cuts, while the button deployment of the balance wheel delivers stability on narrow cuts. Aside from that, the push block comes fully assembled and requires no installation.

Delmar Tools Patented Push Block For Table Saws

● Reduce kickback
● Adjustable width tunnel
● Innovative balance wheel
● Distributes accurate pressure
● User-friendly adjustable center leg

How Can this Product Help You?

The Delmar Tools flexible push block for table saw is the perfect tool to help you make safe and reliable operation rip cuts on your table saw. This push block is designed to create a tunnel of adjustable width that the table saw blade can pass through, allowing easier control than traditional push sticks and feather boards.

With this push block, pressure is evenly distributed for smooth, accurate rip cuts. With the adjustable center leg, you can make cuts of different widths, while the innovative balance wheel enables narrow cuts to be stable.

And best of all, it comes ready to use and does not require any installation, so you can start using it immediately.

Pros:

  • Stabilize narrow cuts with the balance wheel
  • Fully assembled, so no installation is required
  • Protect your hands while eliminating kickbacks
  • Control the rip-cut width with the adjustable tunnel
  • Evenly distribute pressure to both sides of the piece

Con:

  • Hard to grip polished wood with a rubber base

Best Non-Adjustable Push Block for Table Saw

Non-Adjustable Push Block for Table Saw

Various non-adjustable push blocks are available, with a rubber base and a large grip area that allows you to easily hold onto them. The following are the most commonly used non-adjustable table saw push-through blocks:

➤ Fulton Gator Grip Podular Patterned Push Block for Table Saw

Fulton Gator Grip Podular Patterned Push Block for Table Saw

The Fulton Gator Grip podular patterned push block for Table Saw can be a great tool to have for any woodworking project. Its uniquely shaped podular style rubber pad provides a superior grip over foam base push blocks, enabling easier feeding through various workshop cutters.

With its anti-slip unique rubber surface, the Gator Grip table saw push blocks provide reliable control over wood, composites, metals, and resins. Also, its podular pattern helps maintain excellent traction by keeping particles in the surface voids. The superior gripping power of this push block gives you superior control.

The molded handle is angled correctly to keep you from straining when you apply downward and inward pressure with a straight-handled push block. Thus, using force downwards and inwards with ease is made much easier with this push block’s comfortable grip.

Gator Grip Safety Push Block 2 Pack with Blue Rubber Podular Pattern

● Thick raised handle
● Superior gripping power
● Podular patterned rubber pad
● Receptive rubber material grips
● 6-3/8” long by 3-1/4” wide base

How Can this Product Help You?

The Fulton Gator Grip safety push block for Table Saw will enable you to better grip and control your stock while fed through a cutter or blade. Its unique rubber pad design helps to keep dust particles out of the surface voids, which maintains excellent traction.

As well as protecting your fingers from sharp, fast-moving blades and cutters, the raised handle is designed to prevent injuries. With its robust plastic body and comfortable grip, pushing stock toward a cutter or blade is much easier than with a traditional push block.

Pros:

  • Excellent grip with a podular rubber pad
  • Injury-preventing raised molded handle
  • Better grip than foam-base push blocks
  • Prevents dust from getting into surfaces and voids

Con:

  • May tend to slip on the dusty surface

➤ POWERTEC 71032 Safety Push Block Table Saw

POWERTEC 71032 Safety Push Block Table Saw

If you’re looking for a solid build quality safety push block set for your table saw, the POWERTEC 71032 safety push block Table Saw can be a worthwhile option. This set includes two push blocks, each measuring 3 inches by 6 inches, with a 3/16-inch thick foam pad.

The blocks are bright orange color-coded for high visibility and are made of injected and molded ABS plastic durable enough to withstand daily workshop use. Their ergonomic handles make it easy to grip and maneuver the workpiece, and the natural rubber friction pads keep the wood from slipping.

This POWERTEC push block can also be used for many other projects, such as feeding stock into your router table saw or using two push blocks simultaneously for additional downward pressure when feeding stock through a jointer.

Sale
POWERTEC 71032 Safety Push Block Set for Woodworking, Table Saws

● Ergonomic handles
● Two safety push blocks
● High visibility color-coded
● Sturdy ABS plastic material

How Can this Product Help You?

The POWERTEC push block sets are color-coded to make them easy to identify when used and stored, and they have comfortable handles for hand positioning and maneuvering. ABS plastic is injected and molded into these blocks, making them extremely durable and designed to resist daily activity.

Using this block with a table saw provides you with more accurate, more precise cuts due to its 3/16″ thick foam pads on the base side. Overall, this excellent safety push block set can make woodworking projects much easier and safer than a standard push block.

Pros:

  • Color-coded for easy identification
  • Made of injection-molded ABS plastic
  • 3/16″ thick foam pads for more accurate cuts
  • Ergonomic handles for easy grip and maneuvering

Con:

  • Sawdust may reduce their grip

➤ Milescraft 3405 Grabber Push Block for Table Saw

Milescraft 3405 Grabber Push Block for Table Saw

Milescraft 3405 Grabber push block for table saw has a retractable, spring-loaded locking heel that eliminates tear-out during ripping or routing by enhancing control and stability.

The diamond grip rubber bottom prevents boards from slipping and provides maximum control while cutting. With the ergonomically designed, tilted comfort grip handle, you’ll have a superior grip and superior control without using your hands.

Due to its high visibility yellow color, it can be easily seen in a busy store. The Milescraft 3405 GrabberPLUS allows extra control when used with table saws, jointers, and bandsaws.

Sale
Milescraft 3405 GrabberPLUS – Pushblock for Table Saws

● Tilt comfort grip handle
● High visibility yellow color
● Spring-loaded locking heel
● Diamond grip rubber bottom

How Can this Product Help You?

Milescraft Grabber push block is spring-loaded and features retractable locking heels, which help to increase control and stability during cuts. It has a diamond grip rubber bottom that provides maximum control and prevents boards from slipping.

While keeping your hands away from the cutting tool, the tilted comfort grip handles offer superior control and maximum grip-holding power. It is easily spotted in busy shops because of its high visibility yellow color.

With the push block, you can have optimum control over your work, regardless of the application. This easy-to-use tool can be an asset to any woodworking shop.

Pros:

  • An anti-tear locking spring-loaded heel
  • Non-slip TPE gives you maximum control
  • Ergonomic tilted handle for maximum grip
  • Diamond grip rubber bottoms prevent slipping

Con:

  • Don’t offer anti-kickback support

You may find these best push blocks useful when using a table saw. If you are unsure which is best for your needs, make sure you consider the features and benefits of each. Regardless of the model you select, ensure compatibility with the task you are attempting.

Comparison Table for the Top Table Saw Push Block

ProductMaterialColorAdjustabilityItem Weight
MICRO JIGGR-100PlasticYellowFully adjustable‎2 pounds
Delmar ToolsDT-1-MASTERPlasticOrangeAdjustable center leg‎1.54 pounds
Milescraft3405Thermoplastic ElastomerYellowNot Adjustable1.38 pounds
Fulton‎11569Durable Polymer PlasticYellowNot Adjustable‎1.3 pounds
POWERTEC71032ABS PlasticOrangeNot Adjustable0.85 Pounds

How to Choose the Best Push Block for Table Saw?

How to Choose the Best Push Block for Table Saw

Whether a woodworking novice or a seasoned professional, a push block is an essential tool for any table saw as it helps keep your hands from cutting themselves when making cuts.

Here are a few things to consider when selecting a good push block for your table saw:

Push Block Material

There are different types of push blocks available on the market. Each type is designed for a specific purpose. Here is a guide to help you select the best push block for your needs:

  • Hardwood push blocks are designed for general woodworking applications. They are durable and provide a good grip.
  • Softer woods like cedar or pine can be used for sanding and finishing work. These woods are softer and will not damage your workpieces.
  • Plastic push-through blocks are ideal for use with delicate materials. Sometimes they have rubber-padded surfaces to provide a good grip and protect your workpieces from scratches.

Block Durability

When choosing a push block, durability is an important consideration. Look for a block made from sturdy materials such as hardwood or metal.

Avoid flimsy plastic models, which can break easily. The block should also have a textured rubberised surface to help prevent it from slipping. Moreover, it should withstand repeated use without showing wear and tear.

Block’s Base Grip

One crucial factor to consider is the base grip. Some push blocks have a suction cup base, which provides a firm grip on smooth surfaces like granite or marble. Others have a textured podular rubber pad base grip, which is ideal for gripping rough surfaces like wood or concrete.

The type of surface you’ll be working on will help to determine the best type of base grip for your needs. Also, consider how easy it is to attach and remove the base grip. Some models can be attached and removed quickly, while others require a more tedious process.

Ergonomic handle

An ergonomic handle is another important consideration. The handle should be comfortable to grip and easy to hold. A comfortable and easy-to-grip tilt handle will help you apply the right amount of pressure to the block, making it easier to control the saw blade.

Also, an ergonomic handle will reduce the risk of hand fatigue, so you can work for longer periods without feeling exhausted. It should also be positioned so that it does not get in the way of your work.

Easily Cleanable Base

When choosing a push block, you must pick one with an easy-to-clean base. This will help to prevent sawdust and other debris from building up on the block, which can lead to poor performance.

Also, an easily washable base will help extend the push block’s life. By choosing a push block with a cleanable base, you can be sure that you are making a wise investment in your safety and the quality of your work.

When to Use Push Block on Table Saw?

When to Use Push Block on Table Saw

In general, you should always use a push block when using a table saw. Push blocks are always good for rip cuts. The term “rip cut” refers to a cut that is made along the length of the material rather than across it.

The use of a push block is particularly helpful when making rip cuts since the material must be fed into the saw blade. While cutting, you should keep your hands away from the blade.

To guide the material through the blade, utilize a push block rather than your hands whenever possible. Push-through blocks offer much more control than your hands, and they help to prevent kickback.

How Does a Table Saw Push Block Protect Your Finger?

How Does a Table Saw Push Block Protect Your Finger

A table saw can be one of the most dangerous woodworking tools & one of the hazards is the potential for a kickback when the material you’re cutting is hurled back at you.

This can happen if the material becomes bound on the blade or if you’re trying to cut a piece that’s too small. Either way, it can result in serious injury.

A push block is a simple device that helps keep your hands and fingers safely away from the saw blade while cutting. It’s usually made of wood or plastic and has a handle that allows you to apply pressure as needed.

You simply place the push block against the material you’re cutting, and then you use it as a guide for the material as it passes through the blade. This way, your fingers never come into direct contact with the blade, and kickback is much less likely to occur.

You will also be able to make more accurate cuts since a push block eliminates the risk of your fingers interfering with your work.

What are the Advantages of Adjustable Push Blocks for Table Saws?

What are the Advantages of Adjustable Push Blocks for Table Saws

Several types of push blocks are available, but adjustable blocks are among the most popular. Here are some of the advantages of using an adjustable push block:

1. Increase accuracy and safety: By allowing you to control the wood better as it runs through the blade, an adjustable push block helps to improve the accuracy of your cuts. At the same time, it also helps to keep your fingers further away from the blade, making it a safer option than using your bare hands.

2. Less wear and tear on blades: When using an adjustable push block, the blade only comes into contact with the material you are trying to cut. This helps to reduce wear and tear on the blade, making it last longer.

3. Easy to utilize: Many adjustable push blocks come with features that make them easy to use, even for beginners. For example, some models have a built-in adjustable center leg that helps to keep the block level and stable on the material.

4. Compatibility: You can find adjustable push-through blocks that are designed to work with several different table saws, so it’s easy to find one that is compatible with the model that you have.

Are There Any Advantages to Using a Tilt Handle Table Saw Push Block?

Tilted handle table saw push blocks offer many advantages over traditional push blocks. For one, they provide better visibility and control when making cuts. 

The tilted handle design helps keep the material from slipping or moving during the cutting process. A tilted handle makes it easier to keep your hands aligned with the blade, thus preventing injuries.

This angled design of the tilt handle also helps to reduce kickback by keeping the blade more stable. Using a tilted table saw push block has disadvantages, such as the increased risk of tipping over the saw if not appropriately gripped.

Why Do You Need to Push Wood Through a Table Saw Using a Push Block?

Why Do You Need to Push Wood Through a Table Saw Using a Push Block

There are a few reasons you should use a push block when pushing wood through a table saw. The main reason is safety. A push block keeps your hands from touching the blade and prevents the wood from kicking back at you. It also gives you more control over the wood as you cut it.

Using the best push block for a table saw can help improve the quality of your cuts. When you use a push block, you can apply pressure evenly across the whole piece of wood. This helps to prevent the blade from binding and reduces the risk of tear-out.

It’s also much easier to apply consistent pressure with a push block. Using a push block helps distribute force evenly across the workpiece, minimizing the risk of kickback. As an added benefit, a push block allows you to grip the workpiece better, reducing the risk of slipping.

Last update on 2024-12-12 / Affiliate links / Images from Amazon Product Advertising API

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *